仪器的功能和用途
▲利用现代图像处理技术,按中国国家标准GB/T 6595-86的要求分析薄膜的鱼眼大小和数量。
▲适用于透明、半透明、不透明的薄膜或树脂片,如PP、PE、PVC、PPS、EVA、PET等等。
▲也适用玻璃、亚克力板等透明体的内在疵点的检测和分析。
主要技术参数
· 测量规格:0.2mm,0.3,0.4mm,0.8mm等,按选用的标准,可在软件界面选定。
· 测量单元: 2000万像素CCD + 高清镜头
· 最小检测目标: 0.05mm
· 检测精度: 可低至0.025mm Resolution: low to 0.025mm
· 检测面积:200×200mm, 190×200mm,或自定义
· 放大倍数:>20倍
· 光密度:不小于6000流明
· 光源要求: 24V/60W
· 供电电源:220V,50HZ
· 外形尺寸:约459mmⅹ426mmⅹ(276mm+510mm)
Application
-By using modern imaging processing technology, this equipment evaluates the number and size of fish-eye in film in accordance with relevant industry standard or code.
-Applicable for detection and analysis of inner defect objects in transparent or semitransparent or even opaque film and resin sheet,such as PP、PE、PVC、PPS、EVA、PET,etc.
-Also can be used to detect and analyze defect of inner quality in transparent glass or PMMA.
Specifications
-Measurement Range: 0.2mm,0.3mm,0.4mm,0.8mm,etc.,up to relevant code being applied, and is selectable via software.
-Senser unit: 20 million pixel CCD with high resolution lens.
-Min target radius:0.05mm
-Resolution: low to 0.025mm
-Detection Area: 200×200mm,190×200mm,or self-select freely.
-Amplification: more than 30times.
-Light-intensity index : Not less than 6000 Lumens
-Illuminator bulb assembly: 24V/60W
-Power Supply: 220V,50HZ
-Dimension: around 459mmⅹ426mmⅹ(276mm+380mm)