仪器的功能和用途

▲按相关国家标准自动分析塑料颗粒杂质黑点的大小、数量。

▲适用于透明、半透明、不透明的颗粒，如PP、PE、PVC、PPS等等。

▲也适用薄膜等透明体的黑点和内在疵点的检测和分析。

主要技术参数

· 测量规格：0.05mm,0.1mm,0.2mm,0.3,0.4mm,0.8mm,1.0mm,1.2mm，…,等等,按选用的标准，可在软件界面选定。

· 最小检测目标： 0.05mm  

· 检测精度： 小于0.025mm 

· 批次检测量：200ml  

· 器皿大小：120mm×120mm净面积，用于样品的黑点检测。 

· 放大倍数：>20倍  

· 光密度:不小于6000流明 

· 光源要求: 24V/60W  

· 供电电源：220V,50HZ  

· 外形尺寸：约459mmⅹ426mmⅹ(276mm+380mm) 

Applications

-This equipment evaluates the number and size of blackspot,as well as the ratio of blackspot in beads,for esin sheet or pellet in accordance with relevant industry standard or code.

-Applicable for inspection and analysis for transparent or semitransparent or even opaque materials,such as PP,PE,PVC,PPS，etc.

-Also can be used to detect and analyze black spots or defects of inner quality in transparent film.

Specifications

-Measurement Range: 0.1mm,0.2mm,0.3mm,0.4mm,0.8mm,1.0mm,1.2mm,…,etc.,up to relevant code being applied， and is selectable via software.

-Min target radius：0.05mm

-Resolution: less than 0.025mm

-Detection Area: Not less than 120×120mm

-Tray size:  200mm×150mm，net area for bead blackspot inspection.

-Amplification: more than 20times.

-Light-intensity index : Not less than 6000 Lumens

-Illuminator bulb assembly: 24V/60W

-Power Supply: 220V,50HZ

-Dimension:  around 459mmⅹ426mmⅹ(276mm+380mm)