仪器的功能和用途

▲ 自动检测玻璃管的表面缺陷、外径、壁厚，三种功能于一体的在线自动检测系统。

▲ 它是非接触、连续和360°检测的智能测量设备。可安装于玻璃管拉管生产线中，并提供玻璃管的分选功能。

▲ 缺陷类型包含但不限于：裂缝、杂质、结石、气泡、孔洞、污点，及异形等等。

主要技术参数

· 测量范围： 玻璃管直径110mm以下均可，同时适用玻璃圆棒的测量。

· 测量单元： 提供单组，双组，三组，四组CCD+高清镜头不同配置。

· 检测精度： 小于0.01mm (OD=50mm时),精度取决于玻璃管走线速度和外径大小，如需更低精度要求时，可以更换测量传感器实现。玻璃管走线速度：可高达18 meter/min。基本覆盖当前玻璃管生产速度范围。

· 工作距离：可调

· 光源亮度：可调

· 最低安装高度： 玻璃管中心高度350mm。

· 冷却方式：风扇冷却，手动控制/自动控制选配。 

· 冷风吹扫：DN20NPT接口,选配。

· 供电电源：220V,50HZ  

· 输出端口： RS232/RS485/USB3.0/Ethernet(TCP/IP)

· 外形尺寸： 约590mm×590mm×240mm

Applications

- GTA series is a detector and analyzer to inspect and measure,in real-time,the surface quality of glass tube. It automatically measures and inspects the surface defect, the outer diameter and thickness of the tube, which of three function integrated in one model.This device is an intelligent detection instrument with function features of non-contact,continuos,and in all direction of 360°. It can be installed to work in the production line and provide sorting function of glass tube as well.

- GTA-H series is an enhance model to work at hot segment by purging with cold cooling air,which can more closely monitor,adjust and control the tube forming process.

Specifications

-Size range: OD less than 110mm for glass tube and rod as well.

-Senser unit: single,double and triple senser configuration for OD less than 20mm,from 20mm to 30mm,and more than 30mm of tube ,respectively. 

-Accuracy: less than 0.01mm(when OD=50mm),which depends on the velocity and size of the tube. It is also available by changing the senser for more less accuracy.

-Velocity of glass tube: is up to 1000meters/min. 

-Working distance: adjustable.

-Illuminator: adjustable.

-Minimum installation height: 350mm from ground to the line center of glass tube.

-Cooling type: fan cooling being controlled by manual or automatic operation(option)   

-Cold air purging （option）: DN20NPT connector。

-Power Supply: 220V,50HZ

-Communication port: RS232/RS485/USB3.0/Ethernet(TCP/IP)